Before you settle on a drill, a few checks separate a sound pick from a poor one, and this piece lists them in order. It handles drilling holes in wood and drywall, driving screws for furniture assembly, and hanging shelves and curtain rods. It works on wood, drywall, plastic, and light metal, which covers most home jobs. One pick pairs a drill driver with an impact driver in a single kit, and the rest are drill kits. Use the six picks below as a way to compare the checklist points in real tools, with six makers side by side.
A drill checklist before you buy
Use this checklist in order, and check each point against the tool in your hands rather than against a picture. The points cover fit, power, controls, and care, and together they give a clear picture of whether a drill suits your work.
- Hold the tool and check the balance, the grip, and the weight in your hands.
- Work the trigger, the speed control, and the direction switch, and feel for a firm, smooth action.
- Look at battery voltage, torque, and clutch settings and match them to the hardest job you do often.
- Check that drill bits, chuck jaws, and batteries are simple to reach, clean, and replace.
- Look at what comes in the box, such as drill bits, driver bits, and a storage case, and see what else you would need to buy.
Two more checks round out the list, and both are easy to skip in a hurry. First, check the size of the tool against the space where it will live, and measure the shelf or case before you commit. Second, think about the work you do most, and ask whether the tool fits that work rather than a job you may never take on. A tool that passes these checks is a sound pick.
Talk to people who do the same work, and ask what they reach for most. A drill that earns praise from regular users has usually earned it through steady service, and their notes on drill bits, chuck jaws, and batteries are worth more than any single feature. Listen for the habits they repeat, and copy those.
What to look for in a drill
Run through the points below in order, and check each one against the tool in your hands. Last, check the wear parts and the care routine, because drill bits, chuck jaws, and batteries decide how long the tool stays in service. Ask how simple they are to reach and replace, and whether the routine is one you will actually follow. A tool that is simple to care for is a tool that stays in good shape.
Look at battery voltage, torque, and clutch settings first, because those numbers shape what the tool can do on your hardest regular job. Think about the material you cut, drill, or shape most often, and match the tool to that work rather than to a rare task. A tool that handles your usual work with ease will feel right every time you pick it up.
Next, weigh the grip and the balance, and hold the tool the way you would in use. A drill should feel steady, with the weight close to your hands and the controls easy to reach. If the tool feels awkward at rest, it will feel worse after an hour of work, so trust your hands on this point.
A checklist for first use
The first use deserves its own short checklist, and it takes only a few minutes. Read the care notes that come with the tool, fit the right bit, blade, or disc, and check that guards and covers sit where they should. Then run a trial pass on scrap material and watch how the tool behaves before you touch the real workpiece.
After the trial pass, check the result with care: the edge should be clean, the hole or cut should sit where you marked it, and the tool should feel steady in your hands. If anything feels off, stop and adjust the speed, the setting, or your stance. A careful first use builds confidence, and confidence makes the next job easier.
Think about the jobs ahead, not only the job at hand, and let the next few months shape the choice. A drill that handles home repairs and small building jobs will also handle the small repairs that come up in between, and a tool that grows with your work is worth more than one that only fits today. Keep a short list of upcoming jobs, and check each pick against it.
Using your drill with care
Run through the points below in order, and check each one against the tool in your hands. Safety begins before the tool comes out of its case, and the habits are simple: eye protection, a firm grip, and hands kept clear of the spinning bit. Clear the work area, and check that the workpiece is held firm. A clear bench and a firm hold prevent most slips, and they take only a minute to set up.
Work at a steady pace, and let the tool do the work instead of forcing it. For a drill, that means a light touch, a firm grip, and short passes that let you watch the result. If the tool strains or the result looks rough, stop and adjust the speed or the setting before you go on.
Keep the work area tidy as you go, and clear dust and offcuts between passes. A drill throws dust and small chips, and a tidy bench keeps them out of the way of the next cut. When the job is done, wipe the tool clean before it goes back in its case.
Care and storage
Run through the points below in order, and check each one against the tool in your hands. Store the tool where air stays dry and the temperature stays steady, and keep it covered or cased. For a drill, that means a case on a shelf, with bits kept in labeled rows. Damp air and knocks wear a tool faster than use does, so the shelf matters as much as the work.
Check drill bits, chuck jaws, and batteries now and then, and replace them before they fail. A worn part makes the tool work harder and the result rougher, and a fresh part restores the feel at once. Keep a spare of the part you use most, so a worn part never stops a job halfway.
Once in a while, give the tool a closer look: tighten loose screws, check the cord or battery contacts, and look at guards and covers for cracks. A small catch now saves a larger repair later, and a tool that gets this look will run smoother for longer.
Getting more from your drill
Run through the points below in order, and check each one against the tool in your hands. Try a new accessory only after the core jobs feel easy, and add one piece at a time. For a drill, fresh drill bits, chuck jaws, and batteries can change the result more than a new tool, and a small addition is easy to judge on its own. Add slowly, and keep what earns its place.
Set the order of the job before the tool comes out, and work from the rough steps to the fine ones. A drill does its finest work last, when the piece is already close to size, so leave the careful pass for the end. A clear order keeps the work calm and the result clean.
Match the tool to the material in front of you, and change the setting when the material changes. A drill that is set right for wood, drywall, plastic, and light metal will cut, drill, or smooth cleanly, while the wrong setting leaves rough edges and extra work. A short pause to adjust is always faster than fixing a poor result.
Keep a small notebook or a phone note for each job, and jot down the setting that worked. Over time, that record becomes a personal reference for your drill, and the next job in the same material begins with the right setting instead of a guess. Good notes save more time than any single feature.
Related products
The six cordless drills below come from six makers, and each one brings a different mix of variable speed, a clutch with several torque settings, a keyless chuck, and an LED work light. Compare them on the traits in this piece, and notice how the size, the controls, and the included drill bits, driver bits, and a storage case differ from one pick to the next. Run through the points below in order, and check each one against the tool in your hands.
CRAFTSMAN Cordless Drill Set

- Up To 30% More Power – Up to 300 UWO.
- Long Runtime Battery Drill Driver Set- Drill up to 90 holes per charge with the strong brushed motor.
- Get the performance needed for the job at hand with a 2-speed transmission and up to 1,700 (no load) RPM.
BLACK+DECKER 20V Cordless Drill Kit

- 20V MAX* lithium-ion battery always ready for your next project.
- Achieves control and precision with the 24 clutch positions when drilling.
- Soft and comfortable grip when in use.
PULITUO 20V Cordless Drill

- Strong 20 V Motor and 2 x 1.5 Ah Battery: Equipped with a strong 20 V motor and 2 Li-ion battery.
- With two speed options (0-400, 0-1500 RPM ), this drill offers control over your applications.
- Strong 266 In-lb (30 N.m) Torque and 21+1 Settings: With a maximum torque of 266 In-lb (30 N.m) and 21+1 adjustable settings, this drill excels in precision and ease.
AVID POWER 20V Cordless Drill Set

- AVID POWER 20V Lithium-ion battery pack comes with a real-time battery level display, which lets you monitor charge status, so you’re never caught off guard during projects.
- 15+1 Torque Settings for Delicate Work.
- Compact, 2.5 lb lightweight build with a rubberized grip reduces fatigue during prolonged use, making it easy to handle even for first-time users.
FADAKWALT 20V Cordless Drill Set

- FADAKWALT cordless drill comes with a 20 V battery and gives 30 N.m torque.
- 21+1 torque settings power drill can provide more precise torque or speed adjustment as required, which prevents sinking a screw too deep.
- The Cordless Drill set is for crafting and home DIY projects.
DEWALT 20V Cordless Drill and Driver Combo Kit

- Complete a wide range of applications with a high-performance motor that gives up to 300 UWO, and an impact driver giving up to 1,400 in-lbs of torque.
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a handy 20-second delay.
- Work in tight areas with a compact design that gets into tough spots.
Prime covers fast, free delivery on eligible items. See whether a Prime free trial is available for your account.
Check Prime on Amazon →
Write Your Review
No reviews yet. Be the first to share your experience!