A drill that gets regular care runs smoother, lasts longer, and stays safer to use, and this piece gathers the upkeep habits that matter most. It handles drilling holes in wood and drywall, driving screws for furniture assembly, and hanging shelves and curtain rods. It works on wood, drywall, plastic, and light metal, which covers most home jobs. One pick pairs a drill driver with an impact driver in a single kit, and the rest are drill kits. The six picks below come from six makers, and the care habits here apply to each of them in the same way.

Routine care that keeps a drill running

A short routine after each job keeps a drill in good shape, and it takes less time than cleaning up the work area. Wipe dust from the housing, clear the vents, and check that moving parts move freely. For a drill, the core of the routine is simple: wipe the chuck clean after use, keep bits sharp, and store batteries at room temperature. Do it while the job is still fresh in mind, and it becomes habit.

Once a month, give the tool a closer look. Check the cord or battery contacts, look at drill bits, chuck jaws, and batteries for wear, and tighten any loose screws on handles or guards. A small catch now saves a larger repair later, and a tool that gets this monthly look will run smoother for longer.

Keep the workspace in mind as well as the tool, because a good bench, good light, and a clear floor change every job. A drill works well where you can see the mark, hold the piece firm, and move without tripping. A small upgrade to light or storage often helps more than a new tool.

What to look for in a drill

Care is a habit, and the points below work well as a routine rather than a one-time fix. Look at battery voltage, torque, and clutch settings first, because those numbers shape what the tool can do on your hardest regular job. Think about the material you cut, drill, or shape most often, and match the tool to that work rather than to a rare task. A tool that handles your usual work with ease will feel right every time you pick it up.

Next, weigh the grip and the balance, and hold the tool the way you would in use. A drill should feel steady, with the weight close to your hands and the controls easy to reach. If the tool feels awkward at rest, it will feel worse after an hour of work, so trust your hands on this point.

Then look at the features that change daily work, and for a drill those are variable speed, a clutch with several torque settings, a keyless chuck, and an LED work light. Each of them shapes how clean the result looks and how simple the job feels. A tool with the right features needs less effort from you, and the work shows it.

When to replace wear parts

Wear parts are made to be replaced, and knowing when to change them keeps the tool safe and the work clean. For a drill, watch drill bits, chuck jaws, and batteries: when a bit, blade, or disc cuts slower, leaves rough edges, or vibrates more than it did, it has earned a rest. Replace it before it fails, and the tool will feel new again.

Keep a spare of the part you use most, so a worn part never stops a job halfway. Store spares in the case with the tool, and mark the date you fitted the current part so you can judge how long it lasts. Over time, that simple record tells you which parts wear fastest in your work.

Borrow or rent a similar tool once before you commit, if you can, and notice how it feels over a full job. An hour of real use teaches more than any description, and it shows whether the grip, the weight, and the controls suit your hands. A short trial is the fastest way to a confident choice.

Using your drill with care

Care is a habit, and the points below work well as a routine rather than a one-time fix. Work at a steady pace, and let the tool do the work instead of forcing it. For a drill, that means a light touch, a firm grip, and short passes that let you watch the result. If the tool strains or the result looks rough, stop and adjust the speed or the setting before you go on.

Keep the work area tidy as you go, and clear dust and offcuts between passes. A drill throws dust and small chips, and a tidy bench keeps them out of the way of the next cut. When the job is done, wipe the tool clean before it goes back in its case.

Never reach past a moving part, and keep hands, cords, and loose clothing clear of the working end. For a drill, that means waiting for the moving part to stop before you set the tool down or change a part. A short pause is always worth more than a rushed move.

Care and storage

Care is a habit, and the points below work well as a routine rather than a one-time fix. Check drill bits, chuck jaws, and batteries now and then, and replace them before they fail. A worn part makes the tool work harder and the result rougher, and a fresh part restores the feel at once. Keep a spare of the part you use most, so a worn part never stops a job halfway.

Once in a while, give the tool a closer look: tighten loose screws, check the cord or battery contacts, and look at guards and covers for cracks. A small catch now saves a larger repair later, and a tool that gets this look will run smoother for longer.

After each job, wipe the drill clean and clear dust from vents and moving parts. For a drill, the routine is simple: wipe the chuck clean after use, keep bits sharp, and store batteries at room temperature. A clean tool runs cooler, feels better in the hand, and stays ready for the next job without a fuss.

Getting more from your drill

Care is a habit, and the points below work well as a routine rather than a one-time fix. Set the order of the job before the tool comes out, and work from the rough steps to the fine ones. A drill does its finest work last, when the piece is already close to size, so leave the careful pass for the end. A clear order keeps the work calm and the result clean.

Match the tool to the material in front of you, and change the setting when the material changes. A drill that is set right for wood, drywall, plastic, and light metal will cut, drill, or smooth cleanly, while the wrong setting leaves rough edges and extra work. A short pause to adjust is always faster than fixing a poor result.

Keep a small notebook or a phone note for each job, and jot down the setting that worked. Over time, that record becomes a personal reference for your drill, and the next job in the same material begins with the right setting instead of a guess. Good notes save more time than any single feature.

Share the work area with care when others use the same bench, and leave the tool clean for the next person. A drill that is wiped, cased, and put back where it lives is ready for the next job, and a shared bench stays pleasant when everyone follows the same habit.

Before you decide

Care is a habit, and the points below work well as a routine rather than a one-time fix. Keep a short list of the jobs ahead, and check the tool against that list before you settle. A drill that fits the next three jobs is a sound pick, and a tool that only fits one job may sit idle. Let the work ahead decide, and the choice becomes clear.

Below are six cordless drills from six makers, chosen to show the range of what this family offers. Each card notes the traits that set it apart, so you can weigh battery voltage, torque, and clutch settings and the included drill bits, driver bits, and a storage case side by side. Care is a habit, and the points below work well as a routine rather than a one-time fix.

BLACK+DECKER 20V Cordless Drill Kit

BLACK+DECKER 20V Cordless Drill Kit

  • 20V MAX* lithium-ion battery always ready for your next project.
  • Achieves control and precision with the 24 clutch positions when drilling.
  • Soft and comfortable grip when in use.

Check on Amazon →

PULITUO 20V Cordless Drill

PULITUO 20V Cordless Drill

  • Strong 20 V Motor and 2 x 1.5 Ah Battery: Equipped with a strong 20 V motor and 2 Li-ion battery.
  • With two speed options (0-400, 0-1500 RPM ), this drill offers control over your applications.
  • Strong 266 In-lb (30 N.m) Torque and 21+1 Settings: With a maximum torque of 266 In-lb (30 N.m) and 21+1 adjustable settings, this drill excels in precision and ease.

Check on Amazon →

AVID POWER 20V Cordless Drill Set

AVID POWER 20V Cordless Drill Set

  • AVID POWER 20V Lithium-ion battery pack comes with a real-time battery level display, which lets you monitor charge status, so you’re never caught off guard during projects.
  • 15+1 Torque Settings for Delicate Work.
  • Compact, 2.5 lb lightweight build with a rubberized grip reduces fatigue during prolonged use, making it easy to handle even for first-time users.

Check on Amazon →

FADAKWALT 20V Cordless Drill Set

FADAKWALT 20V Cordless Drill Set

  • FADAKWALT cordless drill comes with a 20 V battery and gives 30 N.m torque.
  • 21+1 torque settings power drill can provide more precise torque or speed adjustment as required, which prevents sinking a screw too deep.
  • The Cordless Drill set is for crafting and home DIY projects.

Check on Amazon →

DEWALT 20V Cordless Drill and Driver Combo Kit

DEWALT 20V Cordless Drill and Driver Combo Kit

  • Complete a wide range of applications with a high-performance motor that gives up to 300 UWO, and an impact driver giving up to 1,400 in-lbs of torque.
  • Both the DEWALT impact driver and drill driver feature integrated LED work lights with a handy 20-second delay.
  • Work in tight areas with a compact design that gets into tough spots.

Check on Amazon →

DEKOPRO 20V Cordless Drill Set

DEKOPRO 20V Cordless Drill Set

  • This cordless electric drill has two Variable Speed (0-350/0-1350 rpm) and 18+1 torque settings.
  • This cordless drill comes with a battery and charger, a 20 V 1.5 AH lithium-ion battery.
  • The cordless electric drill is 2.5 pounds, power drills allow for easier protability.

Check on Amazon →

Before you order: check Prime

Prime covers fast, free delivery on eligible items. See whether a Prime free trial is available for your account.

Check Prime on Amazon →