Choosing a drill means matching the tool to the work you do most, and this piece sets out the traits that shape that match. It handles drilling holes in wood and drywall, driving screws for furniture assembly, and hanging shelves and curtain rods. It works on wood, drywall, plastic, and light metal, which covers most home jobs. One pick pairs a drill driver with an impact driver in a single kit, and the rest are drill kits. The six picks below come from six makers, so you can weigh the traits in this piece against real tools side by side.
How to choose a drill
Begin with the work you do most, and let that shape the choice. A drill for home repairs and small building jobs needs battery voltage, torque, and clutch settings matched to that work, and a tool sized for your usual jobs will feel right from the first use. Write down the three jobs you do most often, and check each pick against that list before anything else.
Next, think about your hands and your space. Hold the tool if you can, and notice the grip, the weight, and the reach of the controls. A drill that fits your hands will feel steady in use, and one that fits your shelf will stay clean and ready. Fit matters as much as power, and it is the trait people notice every time they pick the tool up.
Keep the workspace in mind as well as the tool, because a good bench, good light, and a clear floor change every job. A drill works well where you can see the mark, hold the piece firm, and move without tripping. A small upgrade to light or storage often helps more than a new tool.
What to look for in a drill
Choosing well means weighing each point below against the work you do most. Look at battery voltage, torque, and clutch settings first, because those numbers shape what the tool can do on your hardest regular job. Think about the material you cut, drill, or shape most often, and match the tool to that work rather than to a rare task. A tool that handles your usual work with ease will feel right every time you pick it up.
Next, weigh the grip and the balance, and hold the tool the way you would in use. A drill should feel steady, with the weight close to your hands and the controls easy to reach. If the tool feels awkward at rest, it will feel worse after an hour of work, so trust your hands on this point.
Then look at the features that change daily work, and for a drill those are variable speed, a clutch with several torque settings, a keyless chuck, and an LED work light. Each of them shapes how clean the result looks and how simple the job feels. A tool with the right features needs less effort from you, and the work shows it.
Questions to ask before you buy
Ask what comes in the box, and whether drill bits, driver bits, and a storage case are part of the kit or separate. A complete kit saves a second trip, and it keeps everything in one case from day one. Ask too how simple the wear parts are to replace, because drill bits, chuck jaws, and batteries decide how long the tool stays in service.
Ask about care and storage as well, because a tool that is simple to look after gets looked after. For a drill, the care is straightforward: wipe the chuck clean after use, keep bits sharp, and store batteries at room temperature. If the routine sounds simple, the tool will stay in good shape with little effort, and that is a trait worth weighing as much as power.
Borrow or rent a similar tool once before you commit, if you can, and notice how it feels over a full job. An hour of real use teaches more than any description, and it shows whether the grip, the weight, and the controls suit your hands. A short trial is the fastest way to a confident choice.
Using your drill with care
Choosing well means weighing each point below against the work you do most. Work at a steady pace, and let the tool do the work instead of forcing it. For a drill, that means a light touch, a firm grip, and short passes that let you watch the result. If the tool strains or the result looks rough, stop and adjust the speed or the setting before you go on.
Keep the work area tidy as you go, and clear dust and offcuts between passes. A drill throws dust and small chips, and a tidy bench keeps them out of the way of the next cut. When the job is done, wipe the tool clean before it goes back in its case.
Never reach past a moving part, and keep hands, cords, and loose clothing clear of the working end. For a drill, that means waiting for the moving part to stop before you set the tool down or change a part. A short pause is always worth more than a rushed move.
Care and storage
Choosing well means weighing each point below against the work you do most. Check drill bits, chuck jaws, and batteries now and then, and replace them before they fail. A worn part makes the tool work harder and the result rougher, and a fresh part restores the feel at once. Keep a spare of the part you use most, so a worn part never stops a job halfway.
Once in a while, give the tool a closer look: tighten loose screws, check the cord or battery contacts, and look at guards and covers for cracks. A small catch now saves a larger repair later, and a tool that gets this look will run smoother for longer.
After each job, wipe the drill clean and clear dust from vents and moving parts. For a drill, the routine is simple: wipe the chuck clean after use, keep bits sharp, and store batteries at room temperature. A clean tool runs cooler, feels better in the hand, and stays ready for the next job without a fuss.
Getting more from your drill
Choosing well means weighing each point below against the work you do most. Try a new accessory only after the core jobs feel easy, and add one piece at a time. For a drill, fresh drill bits, chuck jaws, and batteries can change the result more than a new tool, and a small addition is easy to judge on its own. Add slowly, and keep what earns its place.
Set the order of the job before the tool comes out, and work from the rough steps to the fine ones. A drill does its finest work last, when the piece is already close to size, so leave the careful pass for the end. A clear order keeps the work calm and the result clean.
Match the tool to the material in front of you, and change the setting when the material changes. A drill that is set right for wood, drywall, plastic, and light metal will cut, drill, or smooth cleanly, while the wrong setting leaves rough edges and extra work. A short pause to adjust is always faster than fixing a poor result.
Keep a small notebook or a phone note for each job, and jot down the setting that worked. Over time, that record becomes a personal reference for your drill, and the next job in the same material begins with the right setting instead of a guess. Good notes save more time than any single feature.
Before you decide
Choosing well means weighing each point below against the work you do most. Keep a short list of the jobs ahead, and check the tool against that list before you settle. A drill that fits the next three jobs is a sound pick, and a tool that only fits one job may sit idle. Let the work ahead decide, and the choice becomes clear.
Related products
These six cordless drills cover the main shapes and sizes in this family, with six makers side by side. Read the cards with your usual jobs in mind, and look for the pick whose variable speed, a clutch with several torque settings, a keyless chuck, and an LED work light match the work you do most. Choosing well means weighing each point below against the work you do most.
DEWALT 20V Cordless Drill and Driver Combo Kit

- Complete a wide range of applications with a high-performance motor that gives up to 300 UWO, and an impact driver giving up to 1,400 in-lbs of torque.
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a handy 20-second delay.
- Work in tight areas with a compact design that gets into tough spots.
DEKOPRO 20V Cordless Drill Set

- This cordless electric drill has two Variable Speed (0-350/0-1350 rpm) and 18+1 torque settings.
- This cordless drill comes with a battery and charger, a 20 V 1.5 AH lithium-ion battery.
- The cordless electric drill is 2.5 pounds, power drills allow for easier protability.
COMOWARE 20V Cordless Drill Set

- This cordless drill gives up to 266 in-lbs (30 Nm) for everyday drilling and driving—assembling furniture, hanging curtains, and drilling wood, drywall, plastic and light metal.
- The 20V 1500mAh battery lasts through most household projects, and the included charger refills it.
- This cordless drill’s clutch offers precise control for drilling, which prevents sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft.
CRAFTSMAN Cordless Drill Set

- Up To 30% More Power – Up to 300 UWO.
- Long Runtime Battery Drill Driver Set- Drill up to 90 holes per charge with the strong brushed motor.
- Get the performance needed for the job at hand with a 2-speed transmission and up to 1,700 (no load) RPM.
BLACK+DECKER 20V Cordless Drill Kit

- 20V MAX* lithium-ion battery always ready for your next project.
- Achieves control and precision with the 24 clutch positions when drilling.
- Soft and comfortable grip when in use.
PULITUO 20V Cordless Drill

- Strong 20 V Motor and 2 x 1.5 Ah Battery: Equipped with a strong 20 V motor and 2 Li-ion battery.
- With two speed options (0-400, 0-1500 RPM ), this drill offers control over your applications.
- Strong 266 In-lb (30 N.m) Torque and 21+1 Settings: With a maximum torque of 266 In-lb (30 N.m) and 21+1 adjustable settings, this drill excels in precision and ease.
Prime covers fast, free delivery on eligible items. See whether a Prime free trial is available for your account.
Check Prime on Amazon →
Write Your Review
No reviews yet. Be the first to share your experience!